home *** CD-ROM | disk | FTP | other *** search
- Subject: FT-50
-
- You take off the battery pack.. remove the sticker on the radio.. undo
- the screws (but not all of the way)-- you push on the screws and the
- keypad will come loose on the other side. Undo the screws all of the way
- to get access to underneath the keypad. There are 3 areas where there can
- be colser pads. Remove the #1 solder pad . AKA there should bo NO solder
- pads connected. Put the radio back together.. and reset the cpu and
- enable the Extended RX mod by using the "knob".
- It will now go just about everywhere.
-
- -- Sacramento
- .-. .-.
- / \ .-. .-. / \
- / \ / \ .-. _ .-. / \ / \
- /-ChrisMorgan KB6YBY--------/---\---/-\---/---\-----/-----\dude@calweb.com\
- \ / \ / `-' `-' \ / \ /
- \ / `-' `-' \ /
- `-' `-'
-